CHINA FACTORY-DIRECT  •  COATED & CUT-RESISTANT WORK GLOVESOEM / PRIVATE LABEL · FULL MANUFACTURER CATALOG LINES
TOUGHORAWork glove supplyRequest a quote
Application

Gloves for Metal Fabrication

Sheet edges, stampings, burrs and swarf: metal fabrication is cut work first and grip work second.

Start from the cut line's sandy and micro-foam models. FS913C3 (13-gauge HPPE, sandy nitrile, EN 388 4X43C / ANSI A3 as printed) is the oily-press workhorse; FM913C (micro-foam nitrile, 4X43C / A3) suits dry handling and deburring where feel matters. For the heaviest sheet work, FS913F6 and HC7113 carry printed ANSI A6 levels — check their model pages for the full printed strings.

Match the finish to the surface: sandy nitrile where parts are oily, micro-foam where they are dry. Ratings on this site are per model, as printed in the manufacturer's catalog, and test reports are available on request.

Models buyers start with

MODEL FS913C3

13-Gauge HPPE Sandy Nitrile Gloves

13-gauge · HPPE · Sandy Nitrile · EN 388 4X43C · ANSI A3

View model ↗MODEL FM913C

13-Gauge HPPE Micro-Foam Nitrile Gloves

13-gauge · HPPE · Micro Foam Nitrile · EN 388 4X43C · ANSI A3

View model ↗MODEL HC7113

13-Gauge Sandy NBR Cut-Resistant Gloves

13-gauge · NBR Sandy · EN 388 4X43F · ANSI A6

View model ↗

Specify gloves for this work

Describe the tasks and hazards. We will point to the models whose printed specifications fit — and say so if none do.

Send your glove requirements